Bellanca 14-13-2 'Cruisair'
|
Michael Goldschmidt Swanzey, NH | I'm not sure this showed my e-mail address: xodix@juno.com 10/06/2007 @ 04:17 [ref: 18117] |
Rick davis Everett, WA | I have a 1941 Bellanca 12-F-3 complete project for sale. This is a beautiful little 3-place retract with sticks.
15K 10/01/2007 @ 11:01 [ref: 18069] |
Michael Goldschmidt Swanzey, NH | Looking for a 14-13-2 or -3 in prime condition for purchase OR an airplane which was airworthy, but grounded in the past several years for dry rot in the wings. Bottom line: I have some good wings and/or good Franklin engine to add to an airframe with minimal labor, which then I would fly, OR I'd purchase a flying airplane and sell those good airworthy wings and a 150 Franklin with about 220 SMOH.
Also happy to sell a beautiful 14-13-2 airframe, which has been stripped, painted, recovered, and beautifully doped. Some assembly and wiring required.
If you want to buy the 150hp Franklin and/or a good airworthy set of wings, please let me know. 08/25/2007 @ 07:12 [ref: 17747] |
msiler abilene, TX | I am in need of a pitot tube for a 14-13 01/24/2006 @ 12:02 [ref: 12292] |
Mike Grimes Lancaster, CA | N74231, BL14-13
Has hydraulic gear, Cleveland wheels & brakes, long tail, baggage compartment and Franklin 6A-350-C1 with McCauley constant speed prop.
Also have two 14-9's as projects 05/04/2005 @ 12:01 [ref: 10111] |
Steven Meng Long Beach CA, CA | I have a Bellanca Cruisemaster 14.19 for sale. The engine has already sold but I have all cowlings and engine mount for the o-435. The fuselage is stripped down and ready for restoration. It is in very good shape. The wings are also for sale. They need wood work but everything is there. Will sell all or part out. The door is removed and cleaned up. The airplane needs a good home and most any offer will be taken. 03/05/2005 @ 15:18 [ref: 9619] |
David Wilkie Huntsville, AL | For further information about Bellanca Aircraft, please check out www.bellanca-championclub.com
This website is an excellent source for parts, complete aircraft, and information. You do not have to be a member of the BCC to use the Forum- just sign up!
Check it out!
Dave Wilkie 01/07/2005 @ 10:26 [ref: 9073] |
Lynn Ford Freeport, PA | After owning a Cherokee for 20 years I finally got something I always wanted. Be careful you might get what you ask for! These old crates are fast and wonderful to fly, but they come with high maintenance and service requirements. They sure turn heads where ever you go and they are the best, At home in the Air ! 06/10/2004 @ 15:50 [ref: 7585] |
David Wilkie Huntsville, AL | Currently restoring NC74392 but would like to convert to hydraulic retracts, Cleveland wheels and brakes, and a Franklin 6A-350-C1 220 hp. engine. Anyone have information of Cruisair owners that have done any or all of these mods? 09/13/2002 @ 15:14 [ref: 5686] |
Larry Lowenkron Eugene, OR | Here is a list of the mods for my Bellanca, N86866. Email me if you have any questions, or want to discuss them.
· Manual Hydraulic Operated Landing Gear
· Champion Oil Filter and Brackett Air Filter
· 3 Fuel pumps,( manual, engine driven, and electric)
· Cowl Flap
· Heated, modified, ACCURATE pitot tube (IFR ertified static system)
· Wingtip Strobes
· Landing Light (dual bulb) in left wing
· New Interior with Confor Foam Front Seats and Mahogany head liner (made from wing skins)
· Well laid out cockpit w/ CB along knee panels
· New instrument panel with:
Basic T w/electric T&B and venturi driven AH & DG
Instrument Post lighting
6 cyl CHT & 6 cyl EGT
Electronic Tachometer
Vertical Card Compass
Center stack radios w/avionics master switch and built in PTT on both yokes
KX 155 w/KI208 w/aux. input for KX99 and stereo
Marker Beacon
AT150 transponder w/mode C
PM 1000 II ICS with four built in jacks
· Vernier throttle and mixture controls
· Goodyear wheels and brakes (same as on Bellanca 260)
· Interior ELT switch
· Imron Paint
· Revised, modernized electrical system
· Pilot’s side window has opening vent
· Wing Root Fairing
08/14/2002 @ 18:24 [ref: 5482] |